FEATURES • The carcass is made from EP fabric,Website:http://www.cnyutung.com, Nylon fabric, Cotton or Terylene Cotton fabric, etc. The belt is manufactured by forming and vulcanizing.   • The patterns available: Chevron / Herringbone / Round Concave.   • Generally the conveyed angle could be up to 35 degrees, for bulk material could be up to 28 degrees.   • Convex type:raised on top cover, the "open" pattern is suitable for conveying material with box packaging or bags packaging and "close" pattern suitable for bulk materials as well as box packaging or bags packaging.  Concaved type or Round Concave: dented in the top cover, mostly used for bulk materials.   • The depth of pattern less than 10 mm applies to conveyed angle less than 20 degrees.   • The depth of pattern more than 10 mm applies to conveyed angle range from 20-40 degrees.APPLICATIONSApply to conveying materials such as powder, granules, knobs as well as packaged materials at angle less than 40 degrees.BELT  TYPESThe belts include general use, oil resistant, acid-alkali resistant, cold resistant, static conductive, fire retardant, wear resistant and heat resistant types, etc. TECHNICAL DATAStandard: In accordance to ISO/FDIS 14890: 1999Adhesion StrengthFabric TypeItem Canvas Ply to        Canvas Ply        (N/mm)Cover to Canvas PlyCover Rubber        Thickness        ≤1.50mmCover Rubber        Thickness        >1.50mmTerylene Cotton-TC70Average Value of Samples in Warp ≥32.102.7Minimum Value of Sample in Warp2.71.602.2Polyester-EP        Nylon-NNAverage Value of Samples in Warp ≥4.503.203.50Minimum Value of Sample in Warp3.902.402.90The peak value of all samples are less than 20 N/mm.Performance of Cover RubberCover GradeTensile StrengthElongation at Break        (%) ≥Abrasion Loss        (mm³ ) ≤Change Rate of Tensile        Strength & Elongation        after Aging (%)(MPa) ≥(Kg/c㎡) ≥Ordinary Conditions (L)15.0150.0350200-25 ~ +25Abrasion Resistant (D)18.0180.0400100-25 ~ +25Cut & Gauge Resistant (H)24.0240.0450120-25 ~ +25When cover rubber thickness ranging from 0.8~1.60mm, it allows 15% tolerance of tensile strength.        Aging Test: 70℃×168h.