The idlers are very important component of belt conveyor. They are present along the entire length of the conveyor,Website:http://www.cnyutung.com, supporting the belt and moving the materials loaded on the belt. The idler's diameter could be correctly selected to comply with the belt width and travel speed. The correct idler length could be selected according to belt width and rollers type. General steel idlers consist of idler shell, spindle, bearing, bearing house, seals and axial fixed units. INSIDE STRUCTUREIdlers consist of idler shell, spindle, bearing, bearing house, seals and axial clip. SealsWe adopt untouched multi-labyrinth seal structure, a complex, bend and narrowed labyrinth channel is formed between the inner seal and outer seal. The channel is illed with grease. Precisely designed and manufactured labyrinth seals are the guarantee on the normal running of the rollers. Its perfect water and dust proof and wear resistance effectively protect the bearing from being damaged. BearingOur idlers choose C3 serials ball bearings, adopt double sealed structure to improve the water and dust proof ability.  Idler Shell, Spindle and Bearing HouseThe idler pipe and spindle comply with industry standard. The T'I'R, roundness, straightness and outline dimension comply with high grade requirement. The bearing house, stamped by good quality steel, is welded to idlers shell by automatic machine hand with precision which ensures the whole strength of the idlers.TYPESCarrying IdlersTrough IdlersTrainer IdlersImpact IdlersSelf-aligning IdlersReturn IdlersFlat Single Return IdlersV Type Return IdlersCleaning Type Return IdlersTrough IdlersA trough idler, which is the most common idlers used on high capacity belt conveyor, is mounted on the carrying side. Generally it consists of 3 rollers in equal length. The two outer rollers are inclined upward and the middle one is horizontal. The inclined degree can be 30°,35°and 45°, some can be up to 60° in suspended type. There are two basic types: standard type and ahead inclined type. The latter can also be present all through the conveyor to prevent the belt from side slip.Self-aligning IdlersThe trainer idlers were fixed to keep belt running in correct line. When belt runs to one side, the structure frame will turn to opposite side.Self Cleaning idlersSelf cleaning idlers are fixed on the return side of the conveyor to clean off the materials that stuck to the belt working surface. They could be identified as following types:  Flat Comb Type, V Comb Type and Flat Spiral Type. Generally, 1 set of spiral idlers would be set closed to the end drum and 5 or 6 sets of comb type return idlers followed.Impact IdlersImpact idlers with rubber rings of high shock absorbing quality are fixed under the feed system. The rubber rings would absorb the impact by falling materials to prevent the belt and idler body from damaging.Flat Return IdlersThey are adopted to support the conveyor belt on return side.SPECIFICATIONSBelt Width        BDiameter        d1Length        L1Belt Width        BDiameter        d1Length        L15007620016001336008931515290010260015918001081946507625018001526701000200089380159102750178108194800893152191024652000152750 1110 22001089501591271781331941000102380219108600245127115022001598001250 2500133178120012746519413370021915214002451592400159900 1400 28001400127530800 1600178133194152219159245194 Idler Frame available on your request