FEATURESThe carcass consists of Terylene fabric in warp and Polyamide in weft.High tensile strength,Website:http://www.cnyutung.com, good resistance to fatigue, low elongation rate in warp, good through-forming ability in weft, etc.Suitable for high humity applications and exhibit good water resistance, stable tensile strength with no mildew growth under wet/humid conditions. EP belts also exhibit a high modulus at start up with good dimensional stability and smoother running.EP belts also offer good impact and tear resistant properties owning to the addtion of reinforced ply in its latitude carcass constructions.Manufactured by forming and vulcanizing.APPLICATIONSWidely used for medium and long distance, heavy loading, high speed, severe corrosion conveying applications.Anti-impact and tear resistant belts are suitable for applications where large materials with relative density up to 2.5g/cm3 to be loaded and with a falling head of more than 1m.BELT TYPESTypes by Applications: Including general purpose conveyor belts, oil resistant, acid and alkali resistant, cold resistant, anti-static, flame retardant and abrasion resistant belt.Types by Structure: Aside from the laminated structure, there's anti-impact and tear resistant belt with reinforced ply weft. TECHNICAL DATAStandard: In accordance to ISO/FDIS 14890:1999Performance at Overall ThicknessFabric TypePly Thickness (mm)Nominal Tensile Strength at Overall Thickness (N/mm)Elongation at Break (%)Elongation at Rated Stress        (%)Belt Width (mm)Belt Length (M)2ply3ply4ply5ply6plyEP800.60160240320400480≥10  ≤4  300~ 1500  ≤300 EP1000.70200300400500600EP1250.70250375500625750EP1500.80300450600750900EP2001.040060080010001200EP2501.20500750100012501500EP3001.250900120015001800EP3501.3000140017502100EP4001.4000160020002400Performance of Cover Rubber (for General Applications)Cover GradeTensile StrengthElongation at Break        (%) ≥Abrasion Loss        (mm³ ) ≤Change Rate of Tensile        Strength & Elongation        after Aging (%)(MPa) ≥(Kg/c㎡) ≥Ordinary Applications (L)15.0150.0350200-25 ~ +25Abrasion Resistant (D)18.0180.0400100-25 ~ +25Extreme Tear Resistant (H)24.0240.0450120-25 ~ +25When cover rubber thickness ranging from 0.8~1.60mm, it allows 15% tolerance of tensile strength.        Aging Test: 70℃×168h.Note: The cover rubber performance for other belt type like oil resistant, acid and alkali resistant, cold resistant and anti-static belt, please refer to the corresponding belt introduction.Adhesion Ply to PlyItemCanvas Ply to        Canvas PlyCover to Canvas PlyCover Thickness 0.8-1.5mmCover Thickness >1.5mmAverage Value of Samples (N/mm) ≥3.02.12.7Minimum Value of Samples (N/mm) ≥2.71.62.2The peak value of all samples are less than 20 N/mm.